Klaes Vangsgaard

Cleaning Procedure for Reshape Imaging System 1. Prepare 70% ethanol Solution: - Dilute the 70% ethanol solution, ensuring the right concentration for effective cleaning. - Wear gloves when handlin...

The well detection algorithm identifies the wells in the image. This is required by the analysis and, in some cases, cropping and stitching to create previews. Troubleshooting We are continuously i...

If something is not behaving as it should with either hardware or the software platform, you will, in many cases, receive an error message guiding you toward the quickest way to resolve the issue. ...

This datasheet describes the Reshape Imaging device, a combined incubator-imaging system used to acquire data for the Reshape Microbiology Platform. Mechanical characteristics Reshape Imaging devi...

Commonly asked questions about the Reshape Microbiology Platform Q: Can we image plates without an internet connection?A: No - due to the huge amount of images generated during data acquisition, an...

A workspace is composed of a given number of imaging units and a given number of users who can access the data from those imaging units as well as start new imaging jobs. Each workspace has one or ...

On your Reshape Imaging device, the lights (three circles in the top left corner of the door) indicate what it is currently doing. Starting Up Breathing White – The robot is powering on. Wait unti...

Internet ConnectionA wired Ethernet connection is recommended for reliable data transfer. Wi-Fi configuration is also available, but performance may depend on your environment. A minimum connection...

InstallationSet up your Reshape Imaging System by following these steps: 1. Open the cardboard box. If possible keep the box and packaging content. 2. Remove the external top foam. 3. Take out robo...

  The user interface is designed to make imaging quick and convenient, even for new users. All options are pre-configured and calibrated across the different plate formats available a...